<th id="7xzl9"><pre id="7xzl9"><meter id="7xzl9"></meter></pre></th>
    <big id="7xzl9"><th id="7xzl9"><nobr id="7xzl9"></nobr></th></big>

    <delect id="7xzl9"><address id="7xzl9"><rp id="7xzl9"></rp></address></delect>
    <track id="7xzl9"></track>
    <track id="7xzl9"><big id="7xzl9"><dfn id="7xzl9"></dfn></big></track>

    <ruby id="7xzl9"></ruby>

    <noframes id="7xzl9"><track id="7xzl9"><progress id="7xzl9"></progress></track>

    <b id="7xzl9"></b>
    <mark id="7xzl9"><form id="7xzl9"><form id="7xzl9"></form></form></mark>

      <address id="7xzl9"></address>
        <menuitem id="7xzl9"><big id="7xzl9"></big></menuitem>

              How to distinguish tempered glass from ordinary glass

              Toughened glass is safety glass. It cools instantaneously when the glass is heated to near softening state according to the principle of material tempering. The toughened stress layer is generated inside the glass, which increases the resistance to pressure and impact on the surface of glass. After being broken, the particles are about the size of corn grains, which basically does no harm to human body

               

              Ordinary glass has low resistance to pressure and impact on the surface, so it is easy to break. After being broken, there are all kinds of shapes, most of which are sharp knife shape and sharp edge. It is very harmful to human body. The glass is very straight without bending

               

              How to distinguish tempered glass from ordinary glass

               

              A simple method to distinguish tempered glass from ordinary glass:

               

              1 with polarized sunglasses, you can see the color stripes, no toughening should not be seen

               

              Turn the angle to see whether there are pressure spots on the glass surface. You will see the irregular deformation of the glass on the whole panel

               

              3 look at the side. When the glass is toughened, it will soften, and the flatness will become worse because of the roller table. When facing each other, the gap in the middle is an ellipse, which is obvious

               

              The flatness of tempered glass is worse than that of ordinary glass. Simple method: put two pieces of glass face-to-face, and observe the two long edges of the two adjacent pieces of glass to see if there is any obvious gap between the long edges of the two pieces of glass. If there are gaps, they are all in a fixed arc. If so, they should be tempered, It's not the back of the face. It's physical. Otherwise, take two X-ray films for a look. When you look at the side at 70 degrees, you should see blue wind spots after tempering. The flatness of the glass is obviously lower than that of the glass without tempering

               

              Bring a flat mirror in the sun. Toughened glass is flower, glass is not

               

              Toughening standard is high temperature ink through screen printing on the glass, in the process of glass tempering, high temperature ink and glass surface combination, so, if you do not use hydrofluoric acid wipe will not be removed (even if the use of hydrofluoric acid will leave more obvious traces). Therefore, to see whether the glass toughened simple and direct way is to mark the toughening mark

               

              Sharp objects can be used to depict the edge of the glass (it is suggested that the glass can not be seen after installation in the future). If it is easy to scratch, it means that the glass is not tempered. If the glass surface is very hard and it is difficult to scratch, it indicates that the glass has been toughened

               


              When a piece of toughened glass is broken, the fragment will break into small particles of average size, and there is no common sharp angle of glass knife

              中文字幕乱码免费,在公车上拨开内裤进入口述,BT天堂种子搜索,又爽又色又过瘾的视频